The oil return line filter of the automobile oil pipe is installed at the oil return line of the hydraulic system, and is used to filter out the metal powder and rubber impurities that are worn by various components in the oil, so as to keep the oil flowing back to the oil tank clean.
The gasket between the parts in the static part of the car acts as a leak-proof seal. If the material, production quality and installation do not meet the technical specifications, the sealing and leak-proof effect will not be achieved, and even accidents will occur.





The filter element of the filter is made of chemical fiber filtration material, which has the advantages of high filtration accuracy, large oil passing capacity, small original pressure loss, and large dirt holding capacity. It is also equipped with a differential pressure transmitter and a bypass valve.
The temperature in the casing rises, and the oil and gas fill the entire space and cannot be discharged, which increases the pressure in the casing and increases the consumption of lubricating oil and shortens the replacement cycle. After the engine ventilation system is blocked, the movement resistance of the piston is increased, which increases the fuel consumption. Due to the difference of air pressure inside and outside the casing, oil leakage is often caused at the weak seal. Therefore, regular inspections, dredging and cleaning of vehicles are required.
Important points to pay attention to when choosing the oil suction pipe, the quality of the car oil suction pipe is also something we should pay attention to when purchasing, otherwise it is very likely to cause damage to our auto parts, then it will not be worth the loss.

The car oil suction pipe is a kind of rubber hose, which is very flexible in use. Similarly, we can use the oil suction pipe of the car to check the oil in the car, which is suitable for all car liquid inspections, although it is a small one. Parts, but it can bring us a lot of convenience, we can prepare one in our car, which can be used as a tool for daily inspection of car oil.

The gasoline pipe is connected to the gasoline pump and the engine injector to provide fuel. There is also a booster oil pipe, which provides booster oil for the steering machine, so as to achieve the purpose of reducing steering resistance. The brake hose is connected to the brake pump and the top post of the brake pad. When we step on the brake, the brake pump will press the brake pads through the brake oil, and the two brake pads will squeeze the brake disc, so as to achieve the purpose of decelerating and stopping the car.